nVent NUHEAT Mesh

The self-adhesive electric floor heating solution.

mesh-header-image
Overview Benefits Installation Technical Pricing & Sizes Downloads
m1
m2
nVentMeshSmallBoxWithRoll
m4

Mesh is an on-site adjustable "strip and roll" solution.

Mesh is best suited for square and rectangular shaped areas where some on-site flexibility is needed. The heating wire is attached to a roll of adhesive mesh material. During installation, the “roll” can be cut, turned, and adhered to the subfloor to provide floor heat in the desired areas of the room. Mesh kits comes in 13 sizes. Choose the mesh kit that is best suited for the size of the room/area and configure on-site to provide floor heat in the desired areas of the room.

Benefits

flexibility
Image Here
flexibility-red
Image Here
On-site flexibility.
Mesh is adjusted on-site to provide heat coverage where it is desired. Installers only need to know the approximate square footage of the area(s) that need to be heated.
layout
Image Here
layout-red
Image Here
Easy to layout.
Mesh comes in a self-adhesive roll which is pressed onto the subfloor and adjusted on-site to provide heat coverage where it is desired.
Size
Image Here
Size-Red
Image Here
Comprehensive selection of sizes to choose from.
Mesh is available in 13 sizes in 120 volt which allows installers to choose the perfect sized kit for the area they wish to heat.
Stock
Image Here
Stock-Red
Image Here
Available immediately.
Find a local distributor near you.

Installation

2017-Mesh-installation-2
Enter the instruction image here
Step 1
Enter the step number here
Roll Mesh onto the subfloor with the wire side down. Start the mesh installation from one corner of the room.
Enter installation instructions here
2017-Mesh-installation-1
Enter the instruction image here
Step 2
Enter the step number here
Lay out and secure Mesh onto subfloor. To make a turn, cut the mesh as required (be careful not to cut/damage the heating wire). Separate heating wire from mesh to maintain heating coverage in small, angled, or difficult areas (if necessary).
Enter installation instructions here
2017-Mesh-installation-3
Enter the instruction image here
Step 3
Enter the step number here
Embed Mesh in mortar (self-leveling compound or latex-modified thinset).
Enter installation instructions here
See our recommended list of materials for planning your project.

Note:
1. Mesh resistance must be tested before, during and after installation to validate nVent Nuheat warranties.
2. All wiring connections should be completed by a certified electrician.
Enter text about materials here

Find an Installer

We work with leading industry professionals who are trained and experts at installing nVent Nuheat products. Find one here today.

Find a nVent Nuheat Certified PRO Installer

Request a Quote

Already have a project in mind? Click below to request a quote for your project.

Request a Quote

Technical

  • Material:

    Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket. Heating cable is attached to a self-adhesive fiberglass mesh material

  • Operating Voltage:

    120 V

  • Power Output:

    12 watts per square foot 

  • Maximum Continuous Exposure Temperature:

    194°F (90°C) 

  • Heating Cable:

    2-wire, grounded, twisted pair with PVC outer jacket

  • Cold Lead:

    2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length

Pricing & Sizing

  • 120V
  • VoltsWattsAmpsOhmsSq. Ft.Roll DimensionsModel No. Price USD*
  • 120V1391.2103.41220" x 8ftN1M012 $239.89
  • 120V1701.484.91520" x 9ftN1M015 $263.87
  • 120V3002.547.92520" x 15ftN1M025 $335.85
  • 120V3442.941.93020" x 19ftN1M030 $383.82
  • 120V4423.732.64020" x 23ftN1M040 $479.79
  • 120V5634.725.65020" x 29ftN1M050 $563.75
  • 120V7206206020" x 36ftN1M060 $666.91
  • 120V8096.717.87020" x 41ftN1M070 $732.99
  • 120V9477.915.28020" x 49ftN1M080 $825.84
  • 120V10228.514.18520" x 52ftN1M085 $857.13
  • 120V11619.712.49520" x 58ftN1M095 $916.51
  • 120V129910.811.111020" x 65ftN1M110 $1147.52
  • 120V146112.29.912020" x 73ftN1M120 $1240.39
  • 240V
  • VoltsWattsAmpsOhmsSq. Ft.Roll DimensionsModel No. Price USD*
  • 240V1650.7348.81520" x 9ftN2M015 $263.87
  • 240V2240.9257.62020" x 13ftN2M020 $299.88
  • 240V3021.3190.72520" x 16ftN2M025 $335.85
  • 240V4031.7142.83520" x 21ftN2M035 $445.87
  • 240V5232.2110.14520" x 28ftN2M045 $539.77
  • 240V6322.691.15520" x 32ftN2M055 $614.12
  • 240V7423.177.66520" x 39ftN2M065 $717.89
  • 240V8423.568.47020" x 43ftN2M070 $732.99
  • 240V10204.356.58520" x 52ftN2M085 $857.13
  • 240V11024.652.39020" x 55ftN2M090 $887.34
  • 240V1211547.610020" x 61ftN2M100 $945.65
  • 240V14275.940.412020" x 73ftN2M120 $1240.39
  • 240V16216.835.513520" x 82ftN2M135 $1360.21
  • 240V17047.133.814520" x 87ftN2M145 $1497.30
  • 240V1914830.116020" x 97ftN2M160 $1620.35
  • 240V20548.62817020" x 102ftN2M170 $1709.96
  • 240V23149.624.919020" x 117ftN2M190 $1891.31
  • 240V258910.822.221520" x 131ftN2M215 $2140.67
  • 240V290512.119.824020" x 147ftN2M240 $2388.98

Downloads

H60104 - EN
Brochure (English)
H60104CF
Brochure (French)
Nuheat Mesh IM
Installation Instructions (English & French)
Nuheat-DS-H59982-MeshFloorHeatingSystem-EN-1805-Web-1
Data Sheet (English)
H59982CF
Data Sheet (French)

Works Well With

Maximize your floor heating solution and check out these related products to optimize your installation.

Blurb here
Nuheat-CustomMat-RadiantHeating

nVent Nuheat Custom Mats

The thinnest custom-built electric floor heating mat.

Learn More
Place image first
thermostat

nVent Nuheat Signature Thermostat

The floor heating industry’s first wifi-enabled, programmable thermostat.

Learn More
Place image first